tools for an air conditioner service

Tips for Cleaning Your AC System in Brandon

With summer coming to an end in Brandon, now is a good time to get a kick start on air conditioner maintenance.

If you haven’t cleaned it lately, it could be full of dirt and debris from your yard. This buildup can limit your unit’s efficiency and cause it to malfunction. Or wear it down faster.

We recommend having your air conditioning system professionally serviced once a year. Why? Clean equipment can be more energy efficient, which could save you money on energy costs.

Routine AC maintenance also helps our technicians locate and address small issues before they become high-priced problems.

Related: How to Keep Your Air Conditioner from Failing

Some of the work we perform includes:

  • Taking a look at the blower, motor, drain line and coils
  • Checking pressure and temperature
  • Reviewing lines, refrigerant totals and connections

You can still have a tune-up done this fall—and we can get your furnace prepared for heating season too.

Schedule maintenance now


There’s also some upkeep you can do alone between professional tune-ups. You only need about an hour to wash your outdoor condenser unit, as well as a couple of components on your indoor HVAC system.

Related: How Often Should You Expect to Get Air Conditioning Service Done?

How to Clean Your Outside AC Unit

Choose a mild day to clean your air conditioner. At least 60 degrees Fahrenheit (20 degrees Celsius) is best. That way, you can run your equipment once you’ve cleaned it.

You’ll only need a handful of items:

  • Wet-dry vacuum and hose with a soft brush attachment
  • Screwdriver
  • Butter knife
  • Damp rag
  • Small, round paintbrush
  • Replacement furnace filter (if necessary)

Related: How AC Repair and Maintenance Can Actually Save You Money

5 Steps to Clean the Outside Unit

1. Turn Off the Power

Cut the power to your air conditioner at the breaker box.

2. Clean the Outside

Remove waste from the system. This includes branches, bushes, weeds and grass.

Then use the vacuum to cautiously clean the metallic fins. These components are also known as condenser coils and move heat away from your system.

You need to be careful with these fine coils. Bent or crinkled fins can impact efficiency.

3. Fix Bent Fins

Use a butter knife to rearrange warped fins. You can also buy a fin comb from an appliance parts retailer. A pro from Brandon Heating and Plumbing should take care of large amounts of damage.

4. Clean the Inside

After extracting the fan, pull out leaves and other yard waste. Then clean the inside of the system with a wet rag.

The only coil cleaner you should use is water. Use light pressure from a hose nozzle to clean the fins, directing water from the inside out. Put the fan back in once you’re finished.

5. Test Your Air Conditioner

You can now restore power and turn your air conditioner back on. If it’s not operating like it should, contact us a call at 204-728-0180.

Related: Air Conditioner Service: Pay a Little Now, Save Later

3 Steps to Clean the Indoor Unit

1. Turn Off the Power

Stop the juice to your furnace at the breaker box.

2. Check Your Filter

Furnace filters should be replaced every couple of months, depending on the type you use.

Can’t remember when you last checked yours? Remove it and hold it up to the light. If there’s no light visible, get a new one.

3. Clean the Inside

Remove the blower door and vacuum up dust.

Then take a look at your air conditioner’s drain line—it’s a pliable plastic tube. If it’s scummy, you can sanitize it by draining water-down bleach through the tube to flush the line. Or you can buy a new tube.

Wash the drain port using a small, round paintbrush. Hook up the drain tube and restore power.

Related: How to Keep Your Air Conditioner Running Well Through Fall

Never Forget a Tune-Up Again

Annual air conditioner maintenance from Brandon Heating and Plumbing can make your unit more efficient and help it last longer. We also offer handy service agreements, so you won’t forget to plan your regular service!

Back To Blog